Discover the mount
Does it hold?
Discover the mount
Does it hold?
Patented magnetic system
Harmless to your smartphone
Handlebar compatible
From 22 to 32 mm in diameter
Excellent holding
Tested at high speed (225 km/h)
Universal sleeve and plate
Compatible with all phones brands
They trust us:
ALL HANDLEBARS
Turnkey installation
ALL HANDLEBARS
Turnkey installation
1. Select the adapter based on your handlebar diameter:
- 31.8 mm handlebars: no adapter needed.
- 28.6 mm handlebars: use the 1.7 mm adapter.
- 25.4 mm handlebars: use the 3.5 mm adapter.
- 22.2 mm handlebars: use the 5.1 mm adapter.
2. Place the adapter on the handlebar, then use the hex key to screw the mount on top.
3. Adjust the Booster 360 (or extension arm) to your preference by tightening the 3 screws on the orientation axes until the Booster is secure.
4. Stick the steel plate to your phone case or place your phone in the sleeve, snap it to the holder (ensuring it's centered), and you're ready to go!
Protects your smartphone
Absorbs vibrations
Protects your smartphone
Absorbs vibrations
When attaching your phone to a motorcycle or scooter, it may be exposed to high-frequency vibrations from the engine. These vibrations can potentially damage your phone's camera (specifically the optical stabilizer).
Our sleeve absorbs up to 50% of engine and road vibrations.
To reduce vibrations by up to 90%, we recommend using the Shapeheart anti-vibration system. Anti-vibration is also recommended when using the steel plate in all situations.
Q&A
Are magnets dangerous for my phone?
No, because there is no magnetic field inside the sleeve or through the plate. We explain everything here.
Moreover, brands like Apple now integrate magnets inside their phones.
I’ve heard that mounts can damage my phone's camera. Is that true?
This is true only for motorcycles, where engine vibrations from certain models can damage the optical stabilizer of some phones (mainly iPhones). However, our mounts with sleeves absorb these vibrations, so there's no risk.
We explain it all here.
Can my phone be stolen?
The question is legitimate, but this is not an issue we encounter. On the one hand, the mount is removable and very discreet, without any visible distinctive signs. The risk is no greater than when holding your phone in your hand on the street.
Snatch thefts mostly occur in public transport, like in the subway, where, once the doors are closed, it becomes difficult to act.
Again, the question is legitimate, but we haven't had any reports of such thefts.
If you are still concerned, you can install the Shapeheart phone leash.
Is the sleeve tactile?
Yes, of course. To ensure the best touch sensitivity, it's important to choose the right sleeve size. Refer to our size guide.
Does the sleeve really protect against the rain?
The Classic and Pro sleeves protect from rain, but they are not designed to be submerged. For that, choose the waterproof sleeve.
In normal conditions, you can ride in the rain without any problem with our three sleeves.
Can my phone overheat?
Obviously, the phone will heat up more inside the sleeve than without. This depends on the phone model, GPS usage, whether you're charging it at the same time, and the outside temperature.
It's rare, but it can happen. In that case, it’s best to choose the version with the steel plate.
Are there reflections in sunlight?
Yes, it can happen depending on the position of the sun, your phone, or your posture on the bike or motorcycle. You can use the steel plate to limit this effect, but keep in mind that even without a sleeve, visibility can be reduced in direct sunlight.
Don't forget to increase the brightness to the maximum.
Can I charge my phone?
Yes! The Classic and Pro sleeves have a slot for the charging cable.
What if I change my phone?
If the size is similar, you don't need to buy anything. Otherwise, you can just purchase a new sleeve without having to replace everything.
Is there a warranty?
Yes, up to 10 years by registering your product. All explained here.
Is it compatible with induction and/or Magsafe charging?
The steel plate is not directly compatible with wireless charging. By sticking the steel plate onto your phone case, you simply need to remove the case to charge your phone on a MagSafe charger.
MagSafe alone will not be enough to absorb shocks. It is essential to use the Shapeheart sleeve or plate to ensure proper support attachment.
Which version to choose?
It's all explained: here.
Free delivery
From €49
Secure payments
Visa, Mastercard, Paypal, Apple Pay
At your service 7 days a week
7/7 customer service: contact@shapeheart.com
Product warranty
10 years by registering your product!
