Motorcycle mount guide

After more than 4 years' thought, we've developed 7 magnetic motorcycle phone holders. But which one should you choose to make your experience the best it can be?

Moto Classique

Motorcycle handlebar mount with strap attachment

Discover the quickest, easiest-to-install phone holder on the market. Simple to use, it ensures an exceptionally reliable hold whatever the road conditions.

With its silicone strap, attach your holder to handlebars up to 30 mm in diameter.

Classic motorcycle mount

Reducible content

For which vehicle(s)?

  • Motorcycle
  • Bike
  • Scooter

Compatibility

Compatible with handlebars and stems up to 30 mm in diameter

Mounting

1. Choose the mounting according to the diameter of your handlebar or your bridges: 

  • Handlebar or bridge from 20 to 30 mm diameter: use the strap
  • Handlebar or bridge from 30 to 50 mm  diameter: use the rubber bands
  • The strap and the rubber bands are made of ultra-resistant silicone guaranteed for 2 years. No risk of damaging the paint of your motorcycle.

2. Position your mount on the handlebar or bridge of the motorcycle, hang the strap or the rubber bands on the mount. 

3. Insert your phone into the sleeve, snap it to the mount (making sure it's centered) and off you go!

Moto Classique

Motorcycle handlebar mount with elastic strap

Use the elastics to attach your mount to the thickest handlebars with a diameter of 30 to 50 mm.

Please note
: The 2 attachments (strap and elastics) should not be used at the same time. Elastics are supplied if the strap is too short for the handlebar diameter.

Classic motorcycle mount

Reducible content

For which vehicle(s)?

  • Motorcycle
  • Bike / /
  • Scooter

Compatibility

Compatible with handlebars and stems up to 50 mm in diameter

Mounting

1. Choose the mounting according to the diameter of your handlebar or your bridges: 

  • Handlebar or bridge from 20 to 30 mm diameter: use the strap
  • Handlebar or bridge from 30 to 50 mm  diameter: use the rubber bands
  • The strap and the rubber bands are made of ultra-resistant silicone guaranteed for 2 years. No risk of damaging the paint of your motorcycle.

2. Position your mount on the handlebar or bridge of the motorcycle, hang the strap or the rubber bands on the mount. 

3. Insert your phone into the sleeve, snap it to the mount (making sure it's centered) and off you go!

Moto pro

Screw mount for motorcycle handlebars

Compatible with most motorcycle handlebars from 22.2 to 31.8 mm in diameter, the PRO motorycle mount lets you secure your phone by screwing the magnetic mount to your handlebars.

Motorcyle Pro mount

Reducible content

For which vehicle(s)?

  • Motorcycle
  • Bike

Compatibility

Compatible with motorcycle and bike handlebars from 22.2 to 31.8 mm in diameter

Mounting

1. Choose the adapter according to the diameter of your handlebar: 

  • 31.8 mm diameter handlebars: no adapter.
  • 28.6 mm diameter handlebars: 1.7 mm adapter.
  • 25.4 mm diameter handlebars: 3.5 mm adapter.
  • 22.2 mm diameter handlebars: 5.1 mm adapter.

2. Position the adapter on the handlebar, then screw the mount on top of it, using the key hex.

3. Insert your phone into the sleeve, snap it to the mount (making sure it's centered) and off you go!

Moto pro Boost

Boost screw mount for motorcycle handlebars

The PRO BOOST motorcycle mount allows you to install your smartphone on your handlebars and let your GPS guide you.

Supplied with its Booster 360, orientate your smartphone as you wish.

Motorcyle Pro Boost mount

Reducible content

For which vehicle(s)

  • Motorcycle

Compatibility

Compatible with motorcycle and bike handlebars from 22.2 to 31.8 mm in diameter

Mounting

1. Choose the adapter according to the diameter of your handlebar: 

  • 31.8 mm diameter handlebars: no adapter.
  • 28.6 mm diameter handlebars: 1.7 mm adapter.
  • 25.4 mm diameter handlebars: 3.5 mm adapter.
  • 22.2 mm diameter handlebars: 5.1 mm adapter.

2. Position the adapter on the handlebar, then screw the mount on top of it, using the key hex.

3. Adjust the Booster 360 (or extension arm) to your convenience by tightening the 3 screws of the orientation axes, until the Booster can no longer move.

4. Insert your phone into the sleeve, snap it to the mount (making sure it's centered) and off you go!

Moto Stem

Screw-on mount for motorcycle handlebars

The Magnetic Sportbike Phone mount is easy to install on any half or full handlebar with a hole diameter ranging from 11 to 24 mm. Simple to use, it ensures a reliable hold regardless of road conditions or speed.

Motorcyle half-handlebar mount

Reducible content

For which vehicle(s)?

  • Sports motorcycles

Compatibility

Compatible with sport bikes with hole diameters ranging from 11 to 24 mm

Mounting

1. Choose the right adapter and nut for your steering column diameter: 

  • 11 to 13.9 mm steering column: 11 mm adapter and 11 mm nut.
  • 14 to 16.9 mm steering column: 14 mm adapter and 11 mm nut.
  • 17 to 24 mm steering column: 17 mm adapter and 14 mm nut.

2. Remove the silicone cover from the mount, screw it sufficiently with the key hex to crush the cylindrical silicone part and make it impossible to remove the mount by hand. 

3. Replace the silicone cover. Insert your phone into the sleeve, snap it to the mount (making sure it's centered) and off you go!

Moto Stem Boost

Motorcycle half-handlebars BOOST mount

Ideal for sport bikes, this magnetic mount for half handlebars will protect your phone from rain or vibration, and ensure an exceptionally reliable hold whatever the road or speed. Thanks to the supplied 360° Booster, you can orientate your smartphone in the ideal position and let your GPS guide you.

Moto Stem Boost mount

Reducible content

For which vehicle(s)?

  • Sports motorcycles

Compatibility

Fits any half-wheel from 11 to 24 mm in diameter

Mounting

1. Choose the right adapter and nut for your steering column diameter: 

  • 11 to 13.9 mm steering column: 11 mm adapter and 11 mm nut.
  • 14 to 16.9 mm steering column: 14 mm adapter and 11 mm nut.
  • 17 to 24 mm steering column: 17 mm adapter and 14 mm nut.

2. Place the mount in the steering column and screw it sufficiently with the key hex to make it almost impossible to remove the mount by hand.

3. Assemble the Booster 360 by replacing the screw, and adjust it to your convenienve by screwing the 3 screws on the orientation axes, until the Booster can no longer move.

4. Insert your phone into the sleeve, snap it to the mount (making sure it's centered) and off you go!

Mirror Pro

Screw mount for motorcycle mirror

The Pro mirror holder screws on to the vast majority of motorcycle and scooter mirrors in seconds. With its two silicone adapters, it fits your mirror between 8 and 17 mm in diameter.

Mirror Pro mount

Reducible content

For which vehicle(s)?

  • Motorcycle
  • Scooter

Compatibility

Fits mirrors from 8 to 17 mm in diameter

Mounting

1. Choose the right adapter according to the diameter of your mirror tube: 

- 15 to 17 mm mirror tube: no adapter required 

- 11 to 15 mm mirror tube: 1 mm adapter 

- 8 to 11 mm mirror tube: 3 mm adapter

2. Using the hex key, screw the magnetic mount, head down, to avoid dropping the screws and then move it upwards. 

3. Insert your phone into the sleeve, snap it to the mount (making sure it's centered) and off you go!

1 of 3