They trust us:
DASHBOARD
Turnkey installation
DASHBOARD
Turnkey installation
1. Remove the plastic part of your scooter that needs to be drilled in order to insert the screw(s).
2. Drill 1 or 2 holes in the part (handlebar or dashboard).
3. Insert the screw(s) and place the tightening washer on the mounting plate side.
Important: Place the strap before tightening the mounting plate, either between the two screws or through the screw.
4. Tighten the mounting plate, then secure the support so the strap is evenly tensioned.
5. Reattach the plastic part of the scooter.
6. Insert your phone into the sleeve, snap it onto the mount (ensuring it's centered), and you're ready to go!
Q&A
I've heard the mounts could damage my phone camera. Is that true?
This is true only for motorcycles, where engine vibrations from certain bikes can damage the optical stabilizer of some phones (mainly iPhones). Our mounts with sleeves absorb the vibrations, so thereâs no risk.
We explain everything here.
Does the sleeve protects from rain?
The Classic and Pro sleeves protect from rain, but they are not designed to be submerged. For that, choose the waterproof sleeve.
In normal conditions, you can ride in the rain without any problem with our three sleeves.
Is the sleeve touch-friendly?
Yes, of course. To ensure the best touch sensitivity, it's important to choose the right sleeve size. Refer to our size guide.
Can my phone overheat?
Obviously, the phone will heat up more inside the sleeve than without. This depends on the phone model, GPS usage, whether you're charging it at the same time, and the outside temperature.
It's rare, but it can happen. In that case, itâs best to choose the version with the steel plate.
Are there reflections in the sunlight
Can I charge my phone?
Yes! The Classic and Pro sleeves have a slot for the charging cable.
What if I change my phone?
If the size is similar, you don't need to buy anything. Otherwise, you can just purchase a new sleeve without having to replace everything.
Is there a warranty?
Yes, up to 10 years by registering your product. All explained here.
Is it compatible with induction and/or MagSafe charging?
The steel plate is not directly compatible with wireless charging. By sticking the steel plate onto your phone case, you simply need to remove the case to charge your phone on a MagSafe charger.
MagSafe alone will not be enough to absorb shocks. It is essential to use the Shapeheart sleeve or plate to ensure proper support attachment.
Can my phone be stolen?
The question is legitimate, but this is not an issue we encounter. On the one hand, the mount is removable and very discreet, without any visible distinctive signs. The risk is no greater than when holding your phone in your hand on the street.
Snatch thefts mostly occur in public transport, like in the subway, where, once the doors are closed, it becomes difficult to act.
Again, the question is legitimate, but we haven't had any reports of such thefts.
If you are still concerned, you can install the Shapeheart telephone leash.
Which version to choose?
It's all explained here.