Bike mount guide

With our range of magnetic bike (and scooter) mounts, you can attach your phone in seconds and let your GPS guide you.

But which of our 3 bike mounts should you choose for the best experience?

Classic Bike

Handlebar mount with strap attachment

Ideal for your bike's handlebars or stem, discover the simplest magnetic phone mount to install on almost all handlebars and stems (round/square) from 20 to 50 mm in diameter.

With its silicone strap, attach your holder to handlebars up to 30 mm in diameter.

Classic bike mount

Strap attacher :

For which vehicle(s)?

  • Bike
  • Scooter
  • Stroller
  • Motorcycle

Compatibility

Compatible with handlebars up to 30 mm in diameter

Mounting

  1. Place the dock on the handlebars or stem, having first attached the strap to 2 hooks.
  2. To distribute the force evenly across the strap, we recommend pulling it down first and then sideways.
  3. Pull it all the way around to attach it to the last 2 hooks.

Classic bike

Handlebar mount with elastic strap

Use the elastic bands to attach your mount to the thickest handlebars or stems, from 30 to 50 mm in diameter. For optimum attachment, make sure you use the 2 elastic bands supplied to hold the mount firmly in place.

Warning:
The 2 attachments (strap and elastics) must not be used at the same time. Elastics are supplied if the strap is too short.

Classic bike mount

Rubber bands attacher

For which vehicle(s)?

  • Bike
  • Scooter
  • Stroller
  • Motorcycle

Compatibility

Compatible with handlebars and stems up to 50 mm in diameter

Mounting

Be sure to use the 2 elastic bands supplied. Each rubber band must be attached to 2 hooks, not all 4.

The elastics must not cross each other and must be positioned as follows:
A - A
B - B

Pro bike

Screw-on handlebar mount

The screw-on handlebar mount is compatible with handlebars from 22 to 32 mm in diameter.

Thanks to its 3 silicon adapters, the mount ensures optimum support.

PRO Bike mount

PRO Bike mount

For which vehicle(s)?

  • Bike
  • Scooter
  • Motorcycle

Compatibility

Compatible with motorcycle and bike handlebars from 22 to 32 mm in diameter

Mounting

1. Choose the adapter according to the diameter of your handlebar: 

  • 31.8 mm diameter handlebars: no adapter.
  • 28.6 mm diameter handlebars: 1.7 mm adapter.
  • 25.4 mm diameter handlebars: 3.5 mm adapter.
  • 22.2 mm diameter handlebars: 5.1 mm adapter.

2. Position the adapter on the handlebar, then screw the mount on top of it, using the key hex.

3. Insert your phone into the sleeve, snap it to the mount (making sure it's centered) and off you go!

STEM BIKE

Bike fork mount

The fork tube mount integrates with your bike by screwing in place of the stem cap. It is compatible with M6 steering stars.

Smartphone fork stem mount for bike

Fork tube mount

For which vehicle(s)?

  • Bike

Compatibility

Compatible with M6 (1"1/8) headset stars from 28 to 32 mm diameter

Mounting

  1. Using the Allen key, unscrew the stem cover and position the mount in the fork tube.
  2. Screw the mount as far as it will go by hand, remove the rubber cover from the mount and finish screwing with the wrench in the middle of the magnets.
  3. Replace the cover on the mount. Insert your phone into the sleeve, snap it to the holder (making sure it's centered) and off you go!
1 of 3