They trust us:
Protects your smartphone
Absorbs vibrations
Protects your smartphone
Absorbs vibrations
When attaching your phone to your motorcycle or scooter, it may be exposed to high-frequency vibrations from the engine. These vibrations can damage your phone's camera (specifically the optical stabilizer).
Our sleeve absorbs up to 50% of engine and road vibrations.
To reduce vibrations by up to 90%, we recommend using the Shapeheart anti-vibration system. It’s also recommended to use anti-vibration when using the steel plate in any situation.
ALL HANDLEBARS
Turnkey installation
ALL HANDLEBARS
Turnkey installation
1. Select the adapter based on your handlebar diameter:
- 31.8 mm: no adapter needed.
- 28.6 mm: use the 1.7 mm adapter.
- 25.4 mm: use the 3.5 mm adapter.
- 22.2 mm: use the 5.1 mm adapter.
2. Place the adapter on the handlebar, then screw the mount on top using the hex key.
3. Insert your phone into the sleeve, snap it onto the mount (ensuring it's centered), and you're ready to go!
Universal-sleeve
Compatible with your smartphone
Universal-sleeve
Compatible with your smartphone
Choose the most suitable pouch for your phone from 3 sizes (M / XL / 2XL) for an optimal fit.
Measure the height of your phone with the case or search from our list, below (advice given with the case).
Q&A
Does it really hold? Can the phone fall out?
Yes, it does. As shown in the videos above, thousands of stores and renowned brands across Europe (Intersport, Decathlon, Fnac, etc.) have trusted us for years.
Of course, if you crash into a tree while mountain biking or do backflips on a motocross, the mount might come off. But for regular riding, you have nothing to worry about.
Find out more here.
Are magnets dangerous for my phone?
No, because there is no magnetic field inside the sleeve or through the plate. We explain everything here.
Moreover, brands like Apple now integrate magnets inside their phones.
I’ve heard that mounts can damage my phone's camera. Is that true?
This is true only for motorcycles, where engine vibrations from certain models can damage the optical stabilizer of some phones (mainly iPhones). However, our mounts with sleeves absorb these vibrations, so there's no risk.
We explain it all here.
Can my phone be stolen?
The question is legitimate, but this is not an issue we encounter. On the one hand, the mount is removable and very discreet, without any visible distinctive signs. The risk is no greater than when holding your phone in your hand on the street.
Snatch thefts mostly occur in public transport, like in the subway, where, once the doors are closed, it becomes difficult to act.
Again, the question is legitimate, but we haven't had any reports of such thefts.
If you are still concerned, you can install the Shapeheart phone leash.
Is the sleeve tactile?
Yes, of course. To ensure the best touch sensitivity, it's important to choose the right sleeve size. Refer to our size guide.
Does the sleeve really protect from rain?
The Classic and Pro sleeves protect from rain, but they are not designed to be submerged. For that, choose the waterproof sleeve.
In normal conditions, you can ride in the rain without any problem with our three sleeves.
Can my phone overheat?
Obviously, the phone will heat up more inside the sleeve than without. This depends on the phone model, GPS usage, whether you're charging it at the same time, and the outside temperature.
It's rare, but it can happen. In that case, it’s best to choose the version with the steel plate.
Are there reflections in sunlight?
Yes, it can happen depending on the position of the sun, your phone, or your posture on the bike or motorcycle. You can use the steel plate to limit this effect, but keep in mind that even without a sleeve, visibility can be reduced in direct sunlight.
Don't forget to increase the brightness to the maximum.
Can I charge my phone?
Yes! The Classic and Pro sleeves have a slot for the charging cable.
What if I change my phone?
If the size is similar, you don't need to buy anything. Otherwise, you can just purchase a new sleeve without having to replace everything.
Is there a warranty?
Yes, up to 10 years by registering your product. All explained here.
Is it compatible with wireless charging and/or MagSafe?
The steel plate is not directly compatible with wireless charging. By sticking the steel plate onto your phone case, you simply need to remove the case to charge your phone on a MagSafe charger.
MagSafe alone will not be enough to absorb shocks. It is essential to use the Shapeheart sleeve or plate to ensure proper support attachment.
Which version to choose?
It's all explained: here.