They trust us:
POWERFUL MAGNETS
A mount that holds strong
POWERFUL MAGNETS
A mount that holds strong
To validate our motorcycle mount, we conducted two tests:
- The first in a wind tunnel at nearly 140 km/h (the wind tunnel’s maximum speed) with LIFSE.
- The second test on the Carole circuit at 225 km/h.
Protects your phone
Absorbs vibrations
Protects your phone
Absorbs vibrations
Our sleeve absorbs up to 50% of engine and road vibrations, eliminating any risk of damage.
The elastic mount also helps absorb some of the vibrations
HANDLEBARS AND STEMS
Turnkey installation
HANDLEBARS AND STEMS
Turnkey installation
1. Select the mount based on the diameter of your handlebar or risers:
- For handlebars or risers with a diameter of 20 to 30 mm: use the strap
- For handlebars or risers with a diameter of 30 to 50 mm: use the elastic bands
- The strap and elastic bands are made from ultra-resistant silicone, guaranteed for 2 years. No risk of damaging your motorcycle's paint.
2. Position the mount on the handlebar or risers of your motorcycle, and secure it using the strap or elastic bands.
3. Insert your phone into the sleeve, snap it onto the mount (ensuring it's centered), and you're ready to go!
UNIVERSAL SLEEVE
Compatible with your phone
UNIVERSAL SLEEVE
Compatible with your phone
Choose the sleeve that best fits your phone from the three available sizes (M / XL / 2XL) for an optimal fit. Measure the height of your phone with the case, or check our list below (recommended with the case).
YOUTUBE AND BLOG
The opinion of those who have tested it
YOUTUBE AND BLOG
The opinion of those who have tested it
Because we can say whatever we want, but the best reviews still come from those who have tested it!
Q&A
Are magnets dangerous for my phone?
No, because there is no magnetic field inside the sleeve or through the plate. We explain everything here.
Moreover, brands like Apple now integrate magnets inside their phones.
I’ve heard that mounts can damage a phone's camera. Is that true?
This is true only for motorcycles, where engine vibrations from certain bikes can damage the optical stabilizer of some phones (mainly iPhones). Our mounts with sleeves absorb the vibrations, so there’s no risk.
We explain everything here.
Can my phone be stolen?
The question is legitimate, but this is not an issue we encounter. On the one hand, the mount is removable and very discreet, without any visible distinctive signs. The risk is no greater than when holding your phone in your hand on the street.
Snatch thefts mostly occur in public transport, like in the subway, where, once the doors are closed, it becomes difficult to act.
Again, the question is legitimate, but we haven't had any reports of such thefts.
If you are still concerned, you can install the Shapeheart phone leash.
Is the sleeve touch-friendly?
Yes, of course. To ensure the best touch sensitivity, it's important to choose the right sleeve size. Refer to our size guide.
Does the sleeve really protects from the rain?
The Classic and Pro sleeves protect from rain, but they are not designed to be submerged. For that, choose the waterproof sleeve.
In normal conditions, you can ride in the rain without any problem with our three sleeves.
Can my phone overheat?
Obviously, the phone will heat up more inside the sleeve than without. This depends on the phone model, GPS usage, whether you're charging it at the same time, and the outside temperature.
It's rare, but it can happen. In that case, it’s best to choose the version with the steel plate.
Are there reflections in the sunlight?
Yes, it can happen depending on the position of the sun, your phone, or your posture on the bike or motorcycle. You can use the steel plate to limit this effect, but keep in mind that even without a sleeve, visibility can be reduced in direct sunlight.
Don't forget to increase the brightness to the maximum.
Can I charge my phone?
Yes! The Classic and Pro sleeves have a slot for the charging cable.
What if I change my phone?
If the size is similar, you don't need to buy anything. Otherwise, you can just purchase a new sleeve without having to replace everything.
Is there a warranty?
Yes, up to 10 years by registering your product. All explained here.
Is it compatible with induction and/or Magsafe charging?
The steel plate is not directly compatible with wireless charging. By sticking the steel plate onto your phone case, you simply need to remove the case to charge your phone on a MagSafe charger.
MagSafe alone will not be enough to absorb shocks. It is essential to use the Shapeheart sleeve or plate to ensure proper support attachment.
Which version to choose?
It's all explained: here.