Thanks to our various magnetic mounts for bikes (and scooters), you can attach your phone in seconds and let your GPS guide you.
But among our 3 bike mounts, which one should you choose for the best experience?
Classic Bike
Handlebar mount
Ideal for your bike's handlebars or stem, discover the easiest magnetic phone mount to install on almost all handlebars and stems (round/square) from 20 to 50 mm in diameter.
With its silicone strap, secure your mount on handlebars up to 30 mm in diameter.
Strap and elastic fasteners:
For which vehicle(s)?
- Bicycle
- Scooter
- Stroller
- Motorcycle
Compatibility
The strap is compatible with handlebars up to 30 mm in diameter.
The elastics are compatible with handlebars and stems up to 50 mm in diameter.
Mounting
THE STRAP:
- Place the dock on the handlebar or stem, after first attaching the strap to 2 hooks.
- To evenly distribute the tension on the strap, we recommend pulling it down first, then sideways.
- Wrap it around, pulling as tight as possible, and attach it to the last 2 hooks.
THE ELASTICS:
Always use both elastics provided. Each elastic should be attached to 2 hooks, not all 4.
The elastics should not cross over and should be positioned like this:
A - A
B - B
Pro bike
Screw mount for handlebar
The screw-mounted bicycle handlebar mount is compatible with handlebars between 22 and 32 mm in diameter.
Thanks to its 3 silicone adapters, the mount ensures optimal hold.
Smartphone PRO mount for bike handlebar
For which vehicle(s)?
- Bicycle
- Scooter
- Motorcycle
Compatibility
Compatible with motorcycle and bike handlebars from 22 to 32 mm in diameter
Mounting
1. Choose the adapter based on your handlebar diameter:
- 31.8 mm diameter handlebar: no adapter.
- 28.6 mm diameter handlebar: 1.7 mm adapter.
- 25.4 mm diameter handlebar: 3.5 mm adapter.
- 22.2 mm diameter handlebar: 5.1 mm adapter.
2. Position the adapter on the handlebar, then screw the mount on top using the Allen key.
3. Insert your phone into the sleeve, snap it onto the mount (making sure it's well-centered), and you're ready to go!
STEM BIKE
Fork mount for bike
The fork tube mount integrates with your bike by screwing into place instead of the stem cap. It is compatible with M6 steering stars.
Fork tube mount
For which vehicle(s)?
- Bicycle
Compatibility
Compatible with M6 star nuts (1"1/8) from 28 to 32 mm in diameter
Mounting
- With the Allen key, unscrew the stem cap and position the mount in the fork tube.
- Screw the mount by hand as tightly as possible, remove the rubber cap from the mount, and finish screwing with the key in the middle of the magnets.
- Replace the cap on the mount. Insert your phone into the sleeve, snap it onto the mount (making sure it's centered), and you're ready to go!