Discover the mount

Does it hold?

Discover the mount

Does it hold?

Adhesive steel plate

✅ Allows you to use mounts without the sleeve
✅ Adheres to the phone’s protective case
✅ Better visibility in direct sunlight
✅ Ultra-thin universal adapter - only 1.5mm

Add to cart - 9,95€

Installation tips

1. Apply to a Protective Case: Stick the plate onto a protective case rather than directly on your phone.

2. Clean Thoroughly: Clean the surface with soap and water, then dry it completely before applying the plate.

3. Allow to Set: Let the adhesive set for a few minutes or hours before using it for the first time.

4. Removing Your Phone: To detach your phone from the mount, press on the plate with your finger.

Warning: The plate will not adhere to non-stick cases such as leather, anti-dust, or other textured materials.

Caution: The plate does not fit between your phone and its protective case.

Product advantages

Reduces glare in bright sunlight
Only 1.5 mm thick
48 mm diameter
New powerful adhesive (3M VHB 5608)
The plate has the same characteristics as the steel plate in the sleeve.
Does not prevent the use of sleeve
Not directly compatible with induction charging. Remove your phone's case to charge it on your MagSafe charger.

Incompatibility with vibrations

Please note! Unlike our sleeves, the adhesive steel plate does not provide total protection against engine and road vibrations. The 2 wheels listed below may cause vibration damage to your smartphone's optical stabilizer:

BMW 310GS, F800 R/GS/GT, R nine T, R1200GS/RT, S1000R
Ducati Hypermotard, Monster, Multistrada, Supersport
Harley Davidson Fat Bob, Low Rider S, Street Bob, Wide Glide
Honda CB, CBR, CRF, Grom, Shadow
Kawasaki Er-6n, KLX, Ninja, Versys, Z650, Z900RS
KTM & Husqvarna All models
MV Agusta Brutale
Suzuki DRZ, GSF, GSX-R, GSX-S
Triumph Bonneville, Rocket 3, Scrambler, Speed Triple, Speed Twin, Thruxton
Yamaha MT, FZ, Tracer, XJ600, XSR 700/900, R6, YZF-R1

However, the use of an adhesive steel plate combined with the Shapeheart Anti-vibration protects your phone, even on these motorcycle models.

ADHESIVE STEEL PLATE

Our advice

Mounting

Vibrations

Sticking the Plate

For optimal adhesion, thoroughly clean your phone case and let the steel plate set before use. We recommend allowing it to rest overnight to ensure the best results and avoid any issues.

Compatible Cases

For best results, stick the plate to a smooth, non-porous surface. Adhesion may vary on textured cases and may not work on textile covers.