Thanks to our range of magnetic scooter mounts, you can attach your smartphone to your rear-view mirror in seconds and let your GPS guide you easily.
But which of our 3 mounts should you choose for the best experience?
Mirror
Mirror mount with strap attachment
The Shapeheart scooter mount installs in seconds on the vast majority of mirrors, thanks to its silicone strap. It ensures optimum support for your phone, whatever the road conditions.
![](http://www.shapeheart.com/cdn/shop/files/Capture_d_ecran_2023-03-06_a_10.41.53.png?v=1678095719&width=1500)
![](http://www.shapeheart.com/cdn/shop/files/Capture_d_ecran_2023-03-06_a_10.40.46.png?v=1678095678&width=1500)
![](http://www.shapeheart.com/cdn/shop/files/Capture_d_ecran_2023-03-06_a_10.41.34.png?v=1678095701&width=1500)
Reducible content
For which vehicle(s)?
- Scooter
Compatibility
Compatible with the vast majority of motorcycle / scooter mirrors ( 10 to 30 mm diameter tubes)
Mounting
- Position your mount on your scooter's rear-view mirror tube and attach your strap to the mount.
The strap is made of ultra-resistant silicone, guaranteed for 2 years. No risk of damaging your scooter's paintwork. - Insert your phone into the sleeve, snap it to the holder (making sure it's centered) and you're ready to go!
Mirror Pro
Screw-on mirror mount
This mirror phone mount screws on in seconds to scooter or motorcycle mirror tubes between 8 and 17 mm in diameter.
![](http://www.shapeheart.com/cdn/shop/files/Capture_d_ecran_2023-03-06_a_10.45.35.png?v=1678095941&width=1500)
![](http://www.shapeheart.com/cdn/shop/files/Capture_d_ecran_2023-03-06_a_10.45.57.png?v=1678095963&width=1500)
![](http://www.shapeheart.com/cdn/shop/files/Capture_d_ecran_2023-03-06_a_10.46.16.png?v=1678095982&width=1500)
Reducible content
For which vehicle(s)?
- Scooter
- Motorcycle
Compatibility
Compatible with most mirrors (8 to 17 mm diameter)
Mounting
1. Choose the right adapter for your mirror tube diameter:
- Mirror tube 15 to 17 mm: no adapter
- Mirror tube 11 to 15 mm: 1 mm adapter
- Mirror tube 8 to 11 mm: 3 mm adapter
2. Using the hex key, screw the magnetic mount, head down, to avoid dropping the screws and then move it upwards.
3. Insert your phone into the sleeve, snap it to the mount (making sure it's centered) and off you go!
Scooter Screw
Dashboard mount
With the Scooter Dashboard mount, simply screw the magnetic mount into the plastic of your scooter dashboard or handlebars.
The installation is fixed and perfect for having your GPS right in front of you.
![](http://www.shapeheart.com/cdn/shop/files/Capture_d_ecran_2023-03-06_a_10.49.25.png?v=1678096170&width=1500)
![](http://www.shapeheart.com/cdn/shop/files/Capture_d_ecran_2023-03-06_a_10.49.43.png?v=1678096189&width=1500)
![](http://www.shapeheart.com/cdn/shop/files/Capture_d_ecran_2023-03-06_a_10.49.59.png?v=1678096205&width=1500)
Reducible content
For which vehicle(s)?
- Scooter
Compatibility
Can be installed on most dashboards and scooter handlebars (4cm space to be drilled to screw the mount)
Mounting
- Remove the plastic part of your scooter to be drilled so that you can insert the screw(s).
- Drill 1 or 2 holes (handlebars or dashboard).
- Fit the screw(s) and place the washer on the plate side.
Important: place the strap before screwing on the mounting plate. Either between the 2 screws, or through the screw. - Screw on the mounting plate, then fix the mount so that the strap is evenly tensioned.
- Replace the scooter's plastic part.
- Insert your phone into the sleeve, snap it to the holder (making sure it's centered) and you're ready to go!