To approve our motorcycle's mount, we did two tests:
- the first in a wind tunnel at nearly 140km/h (maximum wind tunnel speed) with the LIFSE.
- a second test on the Carole circuit at 225km/h.
HANDLEBARS AND STEM
Turnkey installation
HANDLEBARS AND STEM
Turnkey installation
1. Choose the mounting according to the diameter of your handlebar or your bridges:
Handlebar or bridge from 20 to 30 mm diameter: use the strap
Handlebar or bridge from 30 to 50 mm diameter: use the rubber bands
The strap and elastics are made of ultra-resistant silicone, guaranteed for 2 years. No risk of damaging your bike's paintwork.
2. Position your mount on the handlebar or bridge of the motorcycle, hang the strap or the rubber bands on the mount.
3. Stick the adhesive steel plate to the back of your phone's case, snap it to the mount (making sure it's centered) and off you go!
ADHESIVE STEEL PLATE
Compatible with your smartphone
ADHESIVE STEEL PLATE
Compatible with your smartphone
The adhesive metal plate can be installed on the protective case of any smartphone. Thanks to the adhesive metal plate, you'll enjoy optimum visibility when using your phone during your activities.
Please note : depending on the phone case, the adhesive will stick more or less well (on textured shells), or not at all (on textile or anti-dust cases).
YOUTUBE AND BLOG
Reviews of those who tested it
YOUTUBE AND BLOG
Reviews of those who tested it
YOUTUBE
BLOG
Because we could tell you what we want, but the best reviews come from those who have tested it!
Because we could tell you all we want, but the best reviews come from those who have tested it!
Used with a case and magnetic plate, no problem, the phone stays very even when riding well. I recommend
P
Phil H.
POCO F3 + Dualtron X2up (Hyper Trott. Elec.)
Pro boost motorcycle mount + waterproof photo pouch + metal plate.
What can I say?
Well, it's a great piece of gear, with simple, sturdy adjustment...
And even off-road, nothing moves. Having tested so many others, this one's TOP!
R
Rachel
S21 + 800VFR Vtec 2006
Complete equipment for using the phone as a GPS, as well as for installing it in the steering column for motorcycles with half handlebars (for me: 800VFR Vtec from 2006). I took the pouch, the articulated arm and the vibration damper: good quality!
Be careful to go up a size or two for the phone pouch... It barely fits if you go by the recommended sizes. The stitching on the back of the pouch is starting to show signs of weakness after 4 days of use ... A small plus for the notch at the bottom of the pouch to pass the phone's charging cable through!
Detailed assembly instructions would have been appreciated, as it's a bit complicated to assemble the three parts ordered.
In any case, the material is of excellent quality and gives you confidence! We'll see how waterproof the pouch really is over time, but I highly recommend it!
Yes, it does. As you can see from the videos above, there's a reason why thousands of stores and well-known names in Europe (Intersport, Decathlon, Fnac, etc.) have been placing their trust in us for several years now.
So yes, if you're taking on a tree on a mountain bike or doing backflips on a motocross bike, the mount could come off, but if you're a regular rider, there's no need to worry.
Can someone steal my phone?
It's a legitimate question, but it's not a concern of cours. On one hand, you have to bear in mind that the mount is removable. Our mounts are very discreet, with no apparent distinctive sign. There's no more risk than when you're walking down the street with your phone in your hand. Most snatch thefts take place in public transports. In the subway, for example, where once the doors are closed, there's nothing you can do about it. Once again, this is a legitimate question, but we haven't had the slightest feedback on this type of theft.
Are magnets dangerous for my phone?
No. Simply because there is no magnetic field in the sleeve or through the plate. We explain it all here.
Just think, brands like Apple even put magnets inside the phone now.
Yes, up to 10 years by registering your product. All explained here.
Is it compatible with induction and/or Magsafe charging?
The metal plate is not directly compatible with induction charging. By gluing the metal plate to your phone's shell, you simply remove the shell from your phone to charge it on your MagSafe charger.
The Magsafe won't be enough to withstand the shocks. It is essential to use the Shapeheart sleeve or plate to ensure proper use of the mounts.
Free delivery
from €49
Secure payments
Visa, Mastercard, Paypal, Apple Pay
At your service 7/7 days a week
7/7 day service: contact@shapeheart.com
Product warranty
10 years by registering your product!
Choosing a selection causes the entire page to be updated.