The guide to the different bicycle mounts

With our different magnetic bike (and scooter) mounts you can attach your smartphone in seconds and let your GPS guide you.

But which of our 3 bike mounts should you choose to make your experience the best?

OUR MOUNTS

 

 

The classic support (Strap + rubber bands)

 

 

 

 

The PRO bike rack

 

 

 

 

The support for stem mount

 


The classic support

Ideal for the handlebars or stem of your bike you can find the strap attachment and rubber bands in the bundle " bike mount smartphone ".
For only 29,95€, you can find the easiest way to mount smartphone on almost all handlebars and
almost all handlebars and stems (round/square) from 20 to 60mm diameter.

Please note: The 2 clips (strap and rubber bands) are not to be used at the same time. The rubber bands are supplied in case the strap is too short for the handlebar diameter.

  • HANDLEBAR STRAP ATTACHMENT (20 to 40mm diameter)
The strap attachment

For which product(s): Bicycle / Motorcycle / Scooter

Compatibility: Compatible with handlebars and stems from 20mm to 40mm diameter

Mounting

1) Place the dock on the handlebars or stem having previously attached the strap to 2 hooks of the magnetic support.
2) In order to distribute the force evenly on the strap, we recommend to pull it down first and then to the side

3) Pull it around as far as possible to attach it to the last 2 hooks.


  • ELASTIC HANDLEBAR CLAMP (40 to 60mm diameter)
The rubber bands mount

For which product(s): Bicycle / Motorcycle / Scooter

Compatibility: Compatible with handlebars and stems up to 60mm diameter

Mounting

1) Place the dock on the handlebars or stem having previously attached the rubber bands to 2 hooks.

2) Go around pulling as much as possible to attach them to the last 2 hooks.

Please note: It is imperative to use the 2 rubber bands.

Each rubber band should be attached to 2 hooks, not all 4.


The PRO bike rack

Compatible with most bicycle handlebars (20-28mm diameter), the PRO Shapeheart mount allows you to attach your smartphone by screwing the magnetic mount to your handlebars. smartphone This product is available at bundle "PRO Bike Mount".

The pro bike rack

For which product(s ): Bicycle / Motorcycle

Compatibility: Compatible with bike and motorbike handlebars from 20 to 28mm diameter

Mounting

1) While holding the two parts of the dock, place the lower part of the dock under the handlebar and the upper part on top.
2) Insert the first fixing screw through the upper part of the dock and screw until the dock can stand on its own on the handlebar.

3) Repeat the same step with the second fixing screw
4) Tighten the screws as much as possible to prevent the bracket from moving.


The support for stem mount

The support for stem mount is integrated into your bike by screwing in place of the stem cap. Compatible with the M6 steering stars, you can find this support in the bundle "Support smartphone for bicycle fork"

The pro bike rack

For which product(s ): Bicycle

Compatibility: Compatible with M6 steering stars and our Booster 360

Mounting

1) Remove the stem cover from your bike.
2) Insert the bracket inside the stem mount.

3) Remove the silicone cap from the bracket and screw on.
4) Replace the silicone cap.


Do you also have a motorbike or scooter? Check out the other 2 guides to our various attachments below.

Back to the blog

Leave a comment

Please note that comments must be approved before being published.