Guide to the different scooter mounts

With our different magnetic scooter mounts you can attach your smartphone in seconds and let your GPS guide you easily.

But which one of our 3 mounts should you choose to make your experience the best?

OUR MOUNTS

 

 

The mirror mount (Strap)

 

 

 

 

The magnetic smartphone mirror PRO mount

 

 

 

 

The screwed dashboard bracket

 


The mirror mount (STRAP)

The scooter mount can be fitted in seconds to the vast majority of mirrors using a silicone strap. Compatible with all smartphones and equipped with our magnet system, the mount ensures optimal support for your smartphone whatever the road conditions. You will find this support on the page "Support smartphone for rear-view mirror".

The mirror mount (Strap)

For which product(s ): Scooter / Motorcycle

Compatibility: Compatible with the vast majority of motorbike / scooter mirrors (10 to 30 mm diameter tubes)

Mounting

1) Place the dock on the mirror having previously attached the strap to 2 hooks.
2) In order to distribute the effort evenly on the strap, we recommend to pull it down first and then to the side

3) Pull it around as far as possible to attach it to the last 2 hooks.


The mirror PRO mount

In contrast to the Strap mirror, the smartphone mirror PRO mount can be screwed onto the vast majority of scooter or motorbike mirrors (8 - 17mm) in a matter of seconds. You can find this bracket on the page"PRO mirror bracket" smartphone

The magnetic smartphone mirror PRO mount

For which product(s ): Scooter / Motorcycle

Compatibility: Compatible with most mirrors (8 to 17 mm diameter)

Mounting

1) Choose the correct silicone adapter for your mirror diameter and position it on your mirror
2) Remove the screws from the "big part" of the magnetic dock
3) Screw the magnetic dock with the head downwards to avoid the screws falling out.
4) Place the magnetic dock back on top.

Please note: smartphone is 150gr, it is not necessary to tighten the screws to the maximum of your strength (this may weaken the "small part" of the dock)


The screwed dashboard bracket

With the smartphone magnetic dashboard mount for scooters, simply screw the magnetic mount into the plastics of your dashboard or scooter handlebars. The installation is fixed and perfect to have your GPS in front of you.

The screwed dashboard bracket

For which product(s) : Scooter

Compatibility : Fits most dashboards and scooter handlebars (4cm gap to be drilled to screw in the bracket)

Mounting

1) Remove the plastic part of the scooter to be drilled so that the screw can be inserted

2) Drill the part with 1 or 2 holes (handlebar/dashboard)

3) Insert the screw(s) and place the lock washer on the plate side

4) Important: place the strap before screwing the mounting plate. Either between the 2 screws or through the screw

5) Screw on the mounting plate and fix the dock so that the strap is evenly stretched

6) Replace the plastic part of the scooter


Do you also have a bike or motorbike? Check out the other 2 guides to our various attachments below.

Back to the blog

Leave a comment

Please note that comments must be approved before being published.