After more than 4 years of reflection we have succeeded in bringing to market 7 magnetic motorbike mounts from smartphone . But which of these products should you choose to make your experience the best?
| Our mounts | |
|
The classic support (Strap + rubber bands)
|
|
|
Handlebars PRO mount
|
|
|
The half handlebar mount
|
|
|
The magnetic smartphone mirror PRO mount
|
|
The classic support
Ideal for the handlebars of your motorbike you can find the strap attachment and rubber bands in the bundle " support smartphone for motorbike ". For 29,95€, discover the fastest and easiest to install support of smartphone . Simple to use, it ensures an exceptionally reliable hold whatever the road conditions.
Attention: The 2 attachments (strap and rubber bands) are not to be used at the same time. The rubber bands are provided in case the strap is too short for the handlebar diameter.
- HANDLEBAR STRAP ATTACHMENT (20 to 40mm diameter)
| The strap attachment |
|
For which product(s): Bicycle / Motorcycle / Scooter |
|
Compatibility: Compatible with handlebars and stems up to 40mm diameter |
Mounting1) Place the dock on the handlebars or the stem having previously attached the strap on 2 hooks. 3) Pull it around as far as possible to attach it to the last 2 hooks. |
- ELASTIC HANDLEBAR CLAMP (40 to 60mm diameter)
| The rubber bands mount |
|
For which product(s): Bicycle / Motorcycle / Scooter |
|
Compatibility: Compatible with handlebars and stems up to 60mm diameter |
Mounting1) Place the dock on the handlebars or stem having previously attached the rubber bands to 2 hooks. 2) Go around pulling as much as possible to attach them to the last 2 hooks. |
|
Please note: It is imperative to use the 2 rubber bands. Each rubber band should be attached to 2 hooks, not all 4. |
Handlebars PRO mount
Compatible with most motorbike handlebars (from 20 to 28mm in diameter), the PRO Shapeheart mount allows you to attach your smartphone by screwing the magnetic mount to your handlebar. This product is available at bundle "PRO Motorcycle Mount smartphone ".
| The Moto PRO stand |
|
For which product(s ): Bicycle / Motorcycle |
|
Compatibility: Compatible with motorbike and bicycle handlebars from 20 to 28mm in diameter |
Mounting1) While holding the two parts of the dock, place the lower part of the dock under the handlebar and the upper part on top. 3) Repeat the same step with the second fixing screw |
The half handlebar mount
The smartphone magnetic sportbike mount is easy to install on any motorbike half handlebar/wristband (with a hole diameter ranging from 11 to 25 mm). It is also easy to use and provides an exceptionally reliable hold regardless of road conditions or speed.
| The sport bike stand |
|
For which product : Sport bike |
|
Compatibility: Compatible with sport bikes with a hole diameter of 11 to 25 mm |
Mounting1) Remove the silicone cap 2) Choose the right adapter set according to the diameter of your steering column (see above) 3) Tighten it enough so that the cylindrical part of the silicone mount is slightly crushed and it is almost impossible to remove the mount by hand 4) Replace the silicone cap 5) Do a test with your sleeve |
The magnetic smartphone mirror PRO mount
The PRO Magnetic Mirror mount can be screwed onto a vast majority of motorbike or scooter mirrors in a matter of seconds. With its two silicone washers you can adapt it to your mirror diameter (compatible 8 to 17mm).
| The magnetic smartphone mirror PRO mount |
|
For which product(s) : Motorcycle / Scooter |
|
Compatibility: Fits most mirrors from 8 to 17 mm in diameter |
Mounting1) Choose the right silicone adapter according to the diameter of your mirror and position it on your mirror |
|
Please note: smartphone is 150gr, it is not necessary to tighten the screws to the maximum of your strength (this may weaken the "small part" of the dock) |
Do you also have a bike or scooter? Check out the other 2 guides to our various attachments below.
